CONTACT WL PLASTICS PLANT CUSTOMER SERVICE TO CONFIRM AVAILABILITY AND FOR SIZES AND DR’S NOT SHOWN. A. Sizes below IPS 4” per ASTM D3035; Sizes IPS 4” and larger per ASTM F714. See WL106 Pipe Compound and. WL116 Pipe Standards. B. See WL130 for FM Sizes and Ratings. Pressure class (PC) for water at 73°F.
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using IPS OD and Minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specification.
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using IPS OD and Minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specification. DR 7.0 DR 13.5
Pressure Ratings are calculated using 0.63 design factor for HDS at 73°F as listed in PPI TR-4 for PE 4710 materials. Temperature, chemical and environmental use considerations may require use of additional design factors. Pipe weights are calculated in accordance with PPI-7 TR-7.
Available in 1.5" through 12" diameter sizes, this pipe can be connected directly to most plumbing fixtures and IPS appurtenances. It can also be connected into cast and ductile iron fittings with the appropriate adapters, or tran-sition gaskets. JM Eagle’s Ring-TiteTM joint can be …
The following Pipe Dimension Reference chart is for quick reference to some of the commonly used sizing classifications and nominal sizes. The following pages give additional detail for widely used PVC & CPVC pipe in IPS and CTS sizes.
HDPE IPS /CTS /SIDR PIPE SIZES Extremely durable, corrosive, gouging and abrasion resistant. Features 100 years design life per Florida DOT. Great flexibility, and highly suitable for earthquake-prone areas. Highest PE pressure rating, resistance to slow crack growth and rapid crack propagation.
JMM manufactures High Density Polyethylene (HDPE) water pressure pipes for municipal and industrial transmission systems. Our pressure pipe is used in many types of applications such as potable water, sewer, drain, mining, irrigation, slip lining, and reclaimed water.
High Density Polyethylene (HDPE) Pipe Chart PE4710 -Iron Pipe Size (IPS) IPS SDR 7 9 11 13.5 17 21 OD Pressure 335 psi 250 psi 200 psi 160 psi 125 psi 100 psi 2 Wall (minimum) 0.339 0.264 0.216 0.176 0.140 --ID (Average) 1.656 1.816 1.917 2.002 2.079 --
2021年5月5日 · This specification sheet designates the requirements of VERSAPIPE® HD100 PW high density polyethylene water pipe based on outside diameter "Iron Pipe Size" (IPS) SDR and on inside diameter "Standard Inside Dimension Ratios" (SIDR) and third